Anvil® Top Beam C-Clamp, Wide Throat, Series: FIG 94, 5/8 in Rod, 1200 lb, 60 in-lbs Torque, Ductile Iron, Black Oxide, 450 deg F
Finish
Black Oxide
Load Capacity
1200 lb
Material
Ductile Iron
Rod Size
5/8 in
Series
FIG 94
Specifications
60 in-lbs Torque
Temperature Rating
450 deg F
Type
Wide Throat
- Provides clamping to bar joists which are directly under roof installations.
- Provides clamping to bar joists which are directly under roof installations
- Provides for vertical hanger rod installed offset from the edge of the beam flange
- Malleable iron body assures full thread engagement of rod
- Size of clamp is determined by size of rod to be used
- Follow maximum recommended set screw torque values PEX MSS-SP-69
- Hardened steel cup point set screw and locknut
- For use under roof installations with bar joist type construction, or for attachment to the top flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joists or flange does not exceed 1-5/16 in