Check-Trol is the solution for circulator installations. Installing a Check-Trol on the discharge of the circulator gives you the features of a Flow Control Valve, Isolation Valve and Companion Flange. Another advantage of the Check-Trol is the minimal pressure drop, especially when compared to the losses that can be experienced when a check valve is installed internal to the circulator. The Check-Trol flanges are packaged with an isolation flange of the same size to create a pair.
Bell & Gossett Check-Trol™ Isolation Flow Control Flange, 1 in Nominal, C, 150 psig, 200 deg F, Handle Actuator, Brass Body, Brass Trim, PTFE Packing Seat Ring, Polished Chrome, 4-7/16 in Flange, 3 in Inlet to Outlet Length x 2-5/32 in Top to Inlet Center Valve
Actuator Type
Handle
Body Material
Brass
Dimensions
4-7/16 in Flange, 3 in Inlet to Outlet Length x 2-5/32 in Top to Inlet Center Valve
End Style
C
Finish
Polished Chrome
Nominal Size
1 in
Pressure Rating
150 psig
Softgoods Material
PTFE Packing Seat Ring
Temperature Rating
200 deg F
Trim Material
Brass
- Combines three valves in one-isolation valve, check valve and companion flange
- Free floating flange allows easy alignment and installation of pumps
- Prevents gravity circulation
- Isolates the circulator so you don't need to drain the entire system
- 50 state lead free compliant
- Suitable for use with Model NRF/NBF/SSF, Series PL-30, PL-36, PL-55, Series 100, PR, and LR B and G circulators
- Contains less than 0.25% Lead content by weight on wetted surface
- Construction: lead free brass valve body, chrome plated steel flange and lead-free brass ball, nitrile/acetal/stainless steel spring check