CRANE® cast steel gate valves offer the ultimate in dependable service for steam, air, gas, oil, oil vapor, and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion, and resistance to flow. They are available in a wide variety of trims.
CRANE® Gate Valve, Series: 33-1/2, 10 in Nominal, Butt Welded End Style, 740 psi Pressure, 300 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 18 in Inlet to Outlet Length, 50 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 18 in Diameter Hand Wheel
Actuator Type
Handwheel
Body Material
Cast Steel
End Style
Butt Welded
Hand Wheel Diameter
18 in
Inlet to Outlet Length
18 in
Nominal Size
10 in
Pressure Class
300 lb
Pressure Rating
740 psi
Series
33-1/2
Softgoods Material
Graphite Packing
Temperature Rating
-20 to 100 deg F
Top to Inlet Center
50 in
Trim Material
410 Stainless Steel
- Efficient stop valve with flow in either direction
- Commonly used where a minimum pressure drop is important
- Flexible wedge disc compensates for deformation of body due to pipe stress
- Outside screw and yoke
- Seat ring is seal welded to eliminate leak path
- All seat ring are seal welded as standard
- Quality process fully documented, material fully traceable
- Full range of special trims and option available
- Standard construction: wcb-trim 8, other option are available
- Crane recommends the use of manual or powered gear assistance for size 10 in and larger
- F6/Hard faced nominal trim
- 13 Cr ASTM A217 (CA 215) CoCra seating surface