Dixon® External Swage Ferrule, Light Duty, Series: Holedall™ II, 2 in ID x 2-42/64 to 2-54/64 in OD Nominal, Hose, 3-1/8 in Length, 304 Stainless Steel, 3-1/8 in Dia, Domestic
Dimensions
3-1/8 in Dia
Domestic/Import
Domestic
End Style
Hose
Length
3-1/8 in
Material
304 Stainless Steel
Nominal Size
2 in ID x 2-42/64 to 2-54/64 in OD
Series
Holedall™ II
Type
Light Duty
- Light duty 304 stainless ferrules for use with standard length stems such as the TMR series
- Consult Dixon®for die recommendations
- Consult maximum working pressure chart or consult Dixon®for specific pressure recommendations
- Dixon®holedall stems and ferrules are specifically designed to be used together as a coupling system
- Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon®holedall products
- Do not use a wrench or vice on ferrule
- The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
- Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
- Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
- Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon®s assembly procedures, using correct die and ferrule for that particular hose end OD
- Dixon®s die and ferrule recommendation guide is to be used to select correct dies and ferrules
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
- The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
- Media being transported through the hose should be compatible with the stem material
- Compatibility of ferrule material with the environment in which it will be used is recommended
- Do not use in connection with drinking water
- Wash hands after handling