Dixon® Cam and Groove Coupler, Type D, Series: EZ Boss-Lock™, Coupling Fitting/Connector, 6 in Nominal, Female Coupler x FNPT End Style, 5-11/16 in Length, 75 psi Pressure, 316 Stainless Steel, Domestic
Domestic/Import
Domestic
End Style
Female Coupler x FNPT
Fitting/Connector Type
Coupling
Length
5-11/16 in
Material
316 Stainless Steel
Nominal Size
6 in
Pressure Rating
75 psi
Series
EZ Boss-Lock™
Type
Type D
- 9-31/32 in closed across cam arm
- Resistant to accidental disconnection when dragged
- The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm
- Rotating action helps keep the locking device free of debris
- Designed to protect critical parts from impact and to withstand rugged use
- Buna-N gaskets
- Produced to interchange with all product produced to commercial item description A-A-59326D
- If the rotating lever is not flush with the handle, it is not properly engaged
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Under no circumstances should the EZ boss-lock cam arms be used on any fitting not specifically designed for their use
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling