Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, their durability causes them to be suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lbs. of torque. Remember to hand tighten when installing on corrugated pipe.
Fernco® Qwik Cap, Series: QC Series, Fitting/Connector Type: Cap, 6 x 5 in Nominal, 2.2 in Length, PVC, -30 to 180 deg F, 6.255 in, Domestic
Dimensions
6.255 in
Domestic/Import
Domestic
Fitting/Connector Type
Cap
Length
2.2 in
Material
PVC
Nominal Size
6 x 5 in
Series
QC Series
Temperature Rating
-30 to 180 deg F
- Fast, easy installation
- Permanent or temporary cap
- Suitable for above or below ground use as an permanent solution to cap pipe ends, test pipes and cleanouts
- Low cost and reusable
- Convex face minimizes ballooning
- Flexible PVC gasket complying to ASTM D 5926
- 300 series stainless steel clamp
- 60 in lb installation torque
- Flexible PVC 60 duro shore a
- 4.3 psi tested pressure
- Fits 6 in plastic, 6 in cast iron, 6 in copper, 6 in steel, 6 in stainless steel, 5 in eastern standard clay, 5 in orangeburg, 5 in AC, 5 in concrete