Milwaukee Valve Butterfly Valve, Lug Style, Series: ML Series, 5 in Nominal, Lever Handle Actuator, 7.53 in Top to Inlet Center, Ductile Iron Body, Aluminum Bronze Disc, 416 Stainless Steel (Stem)/Stainless Steel (Roll Pin) Stem & Pin Material, Buna-N, 13.6 in H, Domestic
Actuator Type
Lever Handle
Body Material
Ductile Iron
Dimensions
13.6 in H
Disc Material
Aluminum Bronze
Domestic/Import
Domestic
Nominal Size
5 in
Series
ML Series
Softgoods Material
Buna-N
Stem & Pin Material
416 Stainless Steel (Stem)/Stainless Steel (Roll Pin)
Top to Inlet Center
7.53 in
Type
Lug Style
- Bi-directional dead end service to 200 psig maximun
- Bubble tight shut-off
- Milwaukee M series butterfly valve 2 to 12 in is approved by U.S coast guard for use in category A service as described in title 46 code of federal regulations 56.20-15
- Heavy duty Design
- Phenolic cartridge design
- Low torque liner
- Low torque polymer bearing standard
- Field repairable
- Extended neck body
- Low profile disc
- Blow-out proof disc
- Bi-directional shut-off
- Vacuum rating to 29 in of mercury
- 200 psig non-shock
- Note - the wetted surface of this product (in any material combination) contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
- Buna-N liner/stem seal