Designed to support CPVC pipe horizontally from the side of a beam. Fig. 075 must be installed with the mounting tab oriented over top of piping on the side of a beam. It can only be used as a guide on top of beam or on vertical piping. Fig. 075 may be installed onto wood using supplied fasteners or into, minimum 20 gauge, steel using one 1/4 in x l in tek type screw. Features flared edges to protect piping as it slides through the installed fitting.
PHD Wrap Around Strap, 1-Hole, FIG 075 Series, 3/4 in Pipe, 1.05 in Outside Dia, Carbon Steel, Pre-Galvanized, 2-3/8 in L, Domestic
Dimensions
2-3/8 in L
Domestic/Import
Domestic
Finish
Pre-Galvanized
Material
Carbon Steel
Outside Diameter
1.05 in
Pipe Size
3/4 in
Series
FIG 075
Type
1-Hole
- 5.5 feet maximum spacing
- Underwriters Laboratories listed for US and Canada
- For 3/4 to 2 in CPVC pipe
- It can only be used as a guide on top of beam or on vertical piping
- 20 ga (0.035 in) x 1-1/8 in material
- Low carbon steel