Where replenishment of water in floor drain traps is required; trap primer valves shall be 1/2 in FIP inlet x 1/2 in MIP outlet, automatic trap primer valves which activate with a 10 PSIG pressure drop between 30-150 PSIG. Water release shall be factory set. Trap primer valve shall have large port openings and a noncorrosive brass finish. Must be UPC/IAPMO listed, and ASSE certified to the ASSE 1018 standard.
Sioux Chief PrimePerfect™ Trap Prime valve, Automatic, Series: 695, Brass Plated
Finish
Brass Plated
Series
695
Type
Automatic
- DO NOT use thread sealant compound
- For use in accessible locations only
- Can service up to eight traps using splitter and distributors
- Mechanically activates to replenish water in floor drain traps to prevent the escape of sewer gases
- Water release is factory set to 0.25oz per activation - no field adjustment necessary
- Activates with a 10 PSIG pressure drop at operating pressure of 30-150 PSIG
- Debris screen with large openings to prevent clogging from sediment and debris
