Spirax Sarco Pressure Powered Pump™ is a non-electric pump which transfers high temperature condensate or other liquids from a low point, low pressure or vacuum space to an area of higher pressure or elevation. This self-contained unit uses steam, compressed air or any other suitable pressurized gas as the pumping force.
Spirax Sarco Pressure Powered Pump, Low Profile, 30 gpm, 1 in Inlet, 3/4 in Outlet, NPT, 125 psig Operating Maximum, Stainless Steel Float, Cast Iron Body, 19.4 in L x 18.9 in H
Body Material
Cast Iron
Connection Type
NPT
Dimensions
19.4 in L x 18.9 in H
Domestic/Import
Domestic
Float Material
Stainless Steel
Flow Rate
30 gpm
Inlet Size
1 in
Maximum Pressure
125 psig Operating
Outlet Size
3/4 in
Series
PPEC
Type
Low Profile
- 4 gal nominal pump discharge per cycle
- 125 psig at 0 to 450 deg F maximum allowable pressure
- 450 deg F at 0 to 125 psig maximum allowable temperature
- 5 psig minimum motive differential pressure
- 0.9 to 1 specific gravity
- Stainless steel internal
- Stainless steel check valve
- Graphite cover gasket
- 3 lb of steam/1000 lb of liquid pumped air consumption
- 100 SCF/1000 lb of liquid pumped air consumption
- For increased service life, operate pump with motive pressure 15 to 20 psig above pump back pressure