Ecoflex potable PEX single pipes are designed for potable-water distribution applications. The Uponor AquaPEX service pipes in Ecoflex potable PEX piping are manufactured by the Engel-method (PEX-a) process and are listed to ASTM F876 and F877. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.
Uponor Ecoflex® Potable Pipe, Single, 3/4 in PEX Nominal, 0.671 in Inside Dia, 7/8 in Outside Dia, 0.71 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 3.43, 73 to 200 deg F, Polyethylene
Inside Diameter
0.671 in
Material
Polyethylene
Nominal Size
3/4 in PEX
Outside Diameter
7/8 in
R Factor
3.43
Temperature Rating
73 to 200 deg F
Thermal Conductivity
0.25 Btu-in/hr-sq-ft-deg F
Type
Single
Wall Thickness
0.71 in
- Corrugated, seamless high-density polyethylene (HDPE), UV-protected jacket
- Multilayered, closed-cell, crosslinked polyethylene (PEX) foam insulation
- 0.1 g/100 sq in/day vapour permeability
- 6 in bend radius
- Install Ecoflex potable PEX single in hot or cold potable-water applications
- Join pipes using Uponor ProPEX® or WIPEXTM fittings
- Ecoflex end caps are required on all exposed ends of Ecoflex pipes to avoid ground water contamination
- Crosslinked polyethylene material
- SDR-9 engel method of manufacture
- Use ProPEX fittings up to 3 in or WIPEX fittings for the whole range