Uponor's pre-insulated PEX pipe offering complies with ASHRAE 90.1-2013 and the 2012 International Energy Conservation Code (IECC). The pipe is available in 1/2 to 2 in configurations with 1/2, 1, 1-1/2 and 2 in insulation that features manufactured sealed seams that run the entire length of the coil. Check with local code authorities regarding energy-code requirements for specific applications.
Uponor Wirsbo® hePEX™ Pre-insulated Coil, 1 in Nominal, PEX-A, 4.27 in Outside Dia, 100 ft Length, 80 to 160 psi Working, 73.4 to 200 deg F, Polyethylene, ASTM F876/F877/F1960/F2023, CSA B137.5, DIN 4726/9, ETL, IAPMO Listed, ICC-ES, IPC, NBC/NPC of Canada, NSF/ANSI 14/61, NSPC, PPI TR-4, UFGS, UMC Listed, UL Listed, UPC Listed WH
End Style
PEX-A
Length
100 ft
Material
Polyethylene
Nominal Size
1 in
Outside Diameter
4.27 in
Specifications
ASTM F876/F877/F1960/F2023, CSA B137.5, DIN 4726/9, ETL, IAPMO Listed, ICC-ES, IPC, NBC/NPC of Canada, NSF/ANSI 14/61, NSPC, PPI TR-4, UFGS, UMC Listed, UL Listed, UPC Listed WH
Temperature Rating
73.4 to 200 deg F
Working Pressure
80 to 160 psi
- Polyethylene foam insulation
- 0.25 Btu in/h/sq-ft/deg F thermal conductivity
- 1.1 in/10 deg F per 100 ft linear expansion rate
- 5.7 Btu/hr/ft heat loss
- 11.6 R-Value
- 57 x 13.5 in coil
- 73.4 deg F at 160 psi hydrostatic rating
- 180 deg F at 100 psi hydrostatic rating
- 200 deg F at 80 psi hydrostatic rating
- Use ProPEX®1 fittings to connect the piping
- Crosslinked polyethylene PEX-a Engel method pipe
- 1-1/2 in Insulation, 100 ft Coil