The IB Series Inverted Bucket Traps are available in several sizes and capacity ranges. Inverted bucket traps can handle superheated steam when a check valve is used. The smaller traps are primarily used in drip and tracer applications. These traps are also used on unit heaters, laundry equipment, and other process equipment where slow start-up due to poor air handling capability can be tolerated. Larger sizes are used on process equipment; however, since bucket traps have limited air handling capability, Fandt traps are the preferred choice.
Watson McDaniel Inverted Bucket Steam Trap, Series: IB Series, 3/4 in Nominal, NPT, 5-7/8 in Length, 125 psig, Cast Iron, 450 deg F, 5 in W, Domestic
Dimensions
5 in W
Domestic/Import
Domestic
End Style
NPT
Length
5-7/8 in
Material
Cast Iron
Nominal Size
3/4 in
Pressure Rating
125 psig
Series
IB Series
Temperature Rating
450 deg F
- Water hammer resistant
- Suitable for superheated steam
- In-line repairability is simplified by having all internals attached to the cover
- Valve and seat are located at the top of the trap body making them less prone to clogging from debris and pipe scale
- All stainless steel internals with hardened valve and seat
- 800 cross reference Armstrong
- 7/64 in orifice
- 5500 lb/hr maximum capacity