This 3/8 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 10 to 125 psi (0.7 to 8.6 bar) and is factory set at 25 psi (1.7 bar).
WATTS® Pressure Regulator, 2-Way Small, Series: LF26A, 3/8 in Nominal, FNPT End Style, 300 psi Pressure, 0 to 140 deg F, T-Handle Actuator, 2-1/8 in Inlet to Outlet Length, Brass Body, Buna-N Disc Trim, 4-3/8 in Dimensions
- Oversized orifice
- Tee handle adjustment
- NPT threaded female inlet and outlet connections
- Maximum working pressure is 300 psi (21 bar)
- Stainless steel stem and spring
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
- 10 to 125 psi adjustable reduced pressure
- Temperature range is 0 to 140 deg F (-18 to 60 deg C)